Soft Starter  PRR Series

Specifications and features for PRR series soft starter

1. Intelligentized¡ªThe output and input connect point can be programmable,
internal intelligentized programs can check the status of drive-system.
2. Standard internal port (RS485) can realize computer control and remote control.
3. LED display, operator can set all the parameter and program by keypad control.
4. Delay relay function.
5. Malfuction output relay function: When malfunction occurs, this relay will take action.
6. Bypass connector output relay: When the startup is finished, the relay will take action.
7. Delay start function during 0~600s delay time
8. One soft starter drives one more motor.

Control power supply

AC 380V¡À20%, 50/60Hz

3-Phase power supply

AC 380V¡À20%, 50/60Hz

Nominal current

30A¡«630A, totally 16 kinds of rated currents

Motor power

15¡«315KW(rated voltage 380V)

Applicable motor

Common squirrel cage type asynchronous motor

Startup mode

Voltage kick soft startup; current limiting startup (150~400%, adjustable); voltage ramp startup (1¡«180seconds, adjustable)

Stop mode

Free stop; soft stop (1¡«180seconds , adjustable)

Relay output

Delay running output; fault output; full voltage output (by pass) [contact dot: 5A, 250VAC]

Startup frequency

for frequent or infrequent startup;
Advise: not exceeding ten times per hour

Protection function

Phase loss of input, over-load, short circuit, over-heating, and etc.

Safety degree

IP20

Cooling mode

Cooling naturally

Installation mode

Hanging mode

Environment conditions

Environment temperature:-10¡æ~£«50¡æ
Relative humidity:¡Ü95%(20¡æ¡À5¡æ)
Free from flammable gas, explosive gas and corrosive gas, free from electric dust, to be installed indoors with good ventilation
Vibration below 0.5G
If the altitude is above 2000m, the capacity should be decreased accordingly for application.